M332 Stabilized Thermal IP Camera Pairing a rugged, all-weather design with one of the most advanced FLIR thermal imaging cores, the M332 deliver awareness-enhancing thermal vision for law enforcement, commercial, and recreational applications. Advanced gyro-stabilization and high-performance thermal imaging detect obstacles and targets in complete darkness and heavy seas, allowing safe navigation in the most challenging conditions. SAFE NAVIGATION IN LOW VISIBILITY ENVIRONMENTS  Thermal imaging offers vision in complete darkness, glare, and light fog. Powered by the breakthrough FLIR Boson thermal imaging core Thermal resolution 320x256 VOx Microbolometer Smooth image refresh rates up to 30 Hz Pan/Tilt Adjustment Range360° Continuous Pan, +/- 90° Tilt Advanced onboard image processing technology ClearCruise Augmented Reality-enabled when paired with Raymarine Axiom MFDs A STEADY VIEW IN ROUGH SEAS Stable viewing in heavy seas keeps eyes on-target.  Two-axis mechanical stabilization virtually eliminates the effects of pitch, heave, and yaw Integrated AHRS (Attitude Heading Reference Sensor) Horizontal stabilization automatically keeps the camera on scene as you maneuver SEAMLESS INTEGRATION Exceptional connectivity with navigation and security systems. Optional joystick control unit and multifunction navigation display integration (JCU2) ONVIF-compliant for PTZ security camera functionality H.264 IP video stream, HD-SDI lossless, and analog video output Included: M300 Camera Camera base-seal Camera gasket RayNet-to-RJ45 adaptor cable 120 mm (4.72 in.) Right-angled RayNet-to-RayNet cable 3 m (9.8 ft.) Right-angled HD-SDI video cable (with BNC connectors) 3 m (9.8 ft.) Right-angled power/NMEA 0183/video cable 3 m (9.8 ft.) Mounting riser 3 x camera fixings: nuts, dome nuts, spring and flat washers, threaded studs 2 x self-adhesive decals (for ball-down mounting only) Documentation pack

1733200 Mini OLED Voltmeter - Blue Monitors DC voltage on a bright, waterproof, daylight readable OLED screen. Features: Reverse polarity protected Mounts in a common 1-1/8" (29mm) hole Color: Blue Meter: Voltage Nominal Voltage: 12V DC/24V DC Resolution: 0.1 DC Cut Out Dimensions: 1-1/8" (28.58 mm) Input Voltage Range: 8V-36V DC Operating Current: 15mA Switching Cycles: 10,000 Weight: 0.20lb (0.09 kg) WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Stand-Up Swivel - Aluminum Block Specifications: Sheave Dia. 2-2/8" (60 mm) Max Line 1/2" (13 mm) Diameter includes urethane base 3-3/8" (86 mm) Height 4-25/32" (120 mm) H2 2-15/32" (63 mm) Fastener Size (4),1/4" RH (6 mm) C/C 1-11/16" (43 mm) SWL 2250 lbs (1020 kg) Weight Alum. 11.7 oz. (332 g) 

Series 7 Stand Up Ball Bearing Swivel Block - 2-3/8" 60mm Single stand up ball bearing block. Stand up spring keeps block upright when not in use. Stainless steel base spreads load out and may be used with 97-49 backing plate. (sold separately) Delrin(tm) ball bearing sheave provides a low-friction high strength sheave. Sheave Dia. 2-2/8" (60 mm), Max Line 1/2" (13 mm), Dia. includes urethane base 3-3/8" (86 mm), Height 4-25/32" (120 mm), H2 2-15/32" (63 mm), Fastener Size (4),1/4" RH (6 mm), C/C 1-11/16" (43 mm), SWL 1700 lbs (771kg), Weight Alum. 11.7 oz (332 g).

C-MAP 4D NA-D963 Hawaiian Islands The next evolution in navigation solutions. C-MAP 4D adapts to your boating needs because it's the only digital chart that offers advanced features and lets you add data and services as they become available. Full 4D Content When you choose Full 4D content you will experience the latest in navigation data and technology such as: 3D Chart View - The world has three dimensions. When you add the 4th dimension of time - meaning consistent, periodic updates - you combine the most detailed 3D height and depth worldwide database with a continuous update process to give you a personalized navigation experience with up-to-date data for safe navigation. High-Resolution Satellite Imagery - See the real world on your screen. C-MAP 4D includes a navigational perspective with high-resolution coastal imagery overlaid on the most accurate and up-to-date vector data, plus thousands of extraordinary photos for the most popular marinas and areas of interest. Digital Raster Charts - Innovate tradition. With raster charts, you have an additional reference source for navigational awareness. Get "at-a-glance" information using the nautical paper charts overlaid on the multi-dimensional shaded relief to have a new visual experience. Easy Routing - Automatically create a route. Enter start and end points along with specific boat parameters and automatically receive waypoints of the shortest route; highlights potential hazards and displays varying levels of alerts for each segment of the route, allows you to manually adjust the route. Guardian Alarm - An extra layer of safety. When activated, Guardian Alarm performs an automatic forward-scanning check for obstacles. Use the feature as an added backup to alert you should you head toward a potentially harmful object. Detailed NavAids Route Check Detailed Marina Charts C-Marina Ports Database Multi-Language Capability Dynamic Tides & Currents Photos & Diagrams Depths & Land Elevations Perspective View 4D cartography is compatible with the Furuno 1670F / 1870F, and Standard CPN 7000i, and CPN1010i units.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Utility/Wardrobe Hook Features: Chrome Plated Zinc Projection: 1-3/8" Base Width: 1-1/8"

Hydro Clamp/Mount Adapter V2 for Tower Speaker - White The updated V2 clamp is part of the DS18 Hydro All Elements Series which is comprised of many components and accessories to make any build imaginable come to life.  With over 50 marine grade compliant products, we have whatever you need for your ATV, UTV, Side by Side, Jeep, Motorcycle, Boat, or anything in between.  We invite you to get as creative as possible and make the loudest, clearest system on any terrain, water body, or air. Universal Fit, it's perfect for mounting towers/pods on roll bars and cages - perfect for wakeboard speakers! Features: Full Rounded die-cast solid aluminum Buried wire, or open-wire mounting optional Included 2.25", 2.5", 2.75", 3" NBR Pad 360 degree Rotational Bracket Tilt Adjustable 30 degrees UV-Compliant Gloss ∗Sold as an Individual

Voltage Converter Unit Garmin Radar Voltage Converter Module Box for GMR™ 404, 406, 604 and 606 Open Array radars. Compatible Devices: GMR™ 404 GMR™ 406 GMR™ 604 GMR™ 606 In the Box: Voltage Converter 18" Input cable WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Sonic Anemometer Measure wind with no moving parts. Use with a Sensor Transmitter or an EnviroMonitor Node, or as a replacement anemometer for wireless and cabled Vantage Pro2. The Davis Sonic Anemometer has no moving parts – it measures wind speed and direction with electro-acoustic transducers that send sonic pulses back and forth. The time it takes for the pulses to travel from one transducer to the other is affected by the movement of air. Speed and direction can then be calculated, with calibration for air temperature. The Sonic Anemometer has its own solar panel that charges an internal battery. It can be used with an EnviroMonitor Node, or as a replacement anemometer for your Davis weather station. It can also be installed in a Sensor Transmitter to create additional wind stations when reporting to WeatherLink Live. Solar-powered with battery backup. Includes mounting hardware, battery, aligning tool, and 40 ft (12 m) cable. Works with Sensor Transmitter (#6332 or 6331) or EnviroMonitor Node (#6810). (When using with an EnviroMonitor Node, use an RJ Connector Node Adapter.)

SmaetPlug/15 AMP Cordset - 50' This 30 AMP Female SmartPlug to 15 AMP Male Standard Wall Plug (3-pin connector) cordset comes with a Cool Blue LED Power indicator light that glows when power is on.  This cord set provides a super flexible cord that can be tightly coiled even in cold weather.  Features: Multi-Point Locking System – Side clips lock the plug body securely into the inlet which eliminates any stress on the electrical connection from the movement of the power cord. Weatherproof Seals - Silicone gaskets installed in the interior of the plug body eliminate any water penetration when plug is connected to inlet. Technical Specifications: Length - 50' Color - Orange Boatside Connection - 30 AMP/115 V Female SmartPlug Dockside Connection - 15 AMP/115 V Male Standard Wall Plug *Sold as an Individual WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

52MM (2-1/16") OceanLink Coolant Temperature Gauge - 120°C/250°F - White Dial & Bezel OceanLink 52 mm Vessel Status Gauges are connected directly to any OceanLink Master unit using the patented EasyLink serial bus connection.  Up to 16 EasyLink gauges for each Tachometer or GPS Speedometer can be daisy-chained together.   Interchangeable bezel option.  Features: AMP Superseal Easylink 270° pointer deflection angle Reverse polarity protection Anti-fog double lens Front & rear protection rating IPX5 Operating temperature range -20 °C / +70 °C Nominal voltage - 12/24V Hole diameter - 52MM In the Box: Gauge Bezel Rubber Seal Spinlock Installation Instructions Safety Instructions *Sold as an Individual WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

JCU-2 Joystick Control Unit & POE Injector Kit JCU-2 Joystick Control Unit The joystick is the primary control for the M400 & M400XR and the new M300 series (M300C, M332, M364, M364C, and M364C LR. It is used to wake the system or put it in standby, operate the pan and tilt movement, zoom the camera, control cameras modes and features, and configure system settings by means of OSD menus. Includes  Joystick Control Unit (JCU2) Mounting hardware Power Over Ethernet Injector - 12V FLIR's 12V Power Over Ethernet Injector is a key component in connecting your FLIR maritime thermal imaging camera to an Ethernet-equipped Joystick Control Unit. Includes: JCU-2 keypad Keypad mat Mounting gasket 4 x mounting screws, rubber washers, mounting clamps Cable gland nut RJ45-to-RJ45 Ethernet cable, 7.6 m (25 ft) Documentation pack  POE injector

JCU-2 Joystick Controller The joystick is the primary control for the M400 & M400XR and the M300 series (M300C, M332, M364, M364C, and M364C LR. It is used to wake the system or put it in standby, operate the pan and tilt movement, zoom the camera, control cameras modes and features, and configure system settings by means of OSD menus. Includes:  Includes: JCU-2 keypad Keypad mat Mounting gasket 4 x mounting screws, rubber washers, mounting clamps Cable gland nut RJ45-to-RJ45 Ethernet cable, 7.6 m (25 ft) Documentation pack 

Active Imaging 3-in-1 Transom Mount Transducer  See structure and cover with a level of refined detail and at a range unmatched by any other structure imaging technology with Active Imaging™ 3-in-1 sonar featuring CHIRP, SideScan and DownScan with FishReveal™. The high-level clarity, target separation and detail of Active Imaging will help you find more fish by making it easier to quickly identify fish-holding structure like rockpiles, standing timber, weedbeds, ditches and drop-offs – all at a greater distance from your boat. Get the best of CHIRP sonar and DownScan on one screen with the exclusive FishReveal™ Smart Target view that helps you easily recognize fish from structure and cover on high-detailed DownScan images.  Key Features: •    More refined detail and better range than any other imaging technology •    Active Imaging 3-in-1 transducer with Lowrance CHIRP, SideScan and DownScan   •    Easier target identification with FishReveal™ Smart Target View •    Supports Medium and High CHIRP (83/200kHz) + 455/800kHz frequencies •    Compatible with Lowrance HDS LIVE, HDS Carbon, Elite Ti2 and Simrad NSS evo3 and GO series displays Environmental Operating temperature: -15°C to +55°C (+5°F to +131°F) Storage temperature: -30°C to +70°C (-22°F to +158°F) Physical Cable length:   7.6 m (25 ft) Mounting options: Transom, flush step, and jackplate mounting Connector: 9 pin Transducer Output: Traditional, SideScan imaging, DownScan imaging and temperature Frequency: Traditional: 200 kHz/High : Chirp 83 kHz/Medium Chirp, SideScan: 455 kHz, 800 kHz  Max depth: Traditional: 305 m (1000 ft) at 200 kHz/High Chirp and 83 kHz/Medium Chirp: DownScan: 91 m (300 ft): SideScan: 91 m (300 ft) side range at 455 kHz, 46 m (150 ft) Operating speed: Traditional: 48 knots (55 mph): DownScan and SideScan: 9 knots (10 mph)

NavPilot 711C f/Outboards Includes: NavPilot 711C Control Unit FAP7002 Processor Unit PG700 Heading Sensor, NMEA 2000 Kick back, relax and let NavPilot steer you to your destination! FURUNO's NavPilot is a revolutionary autopilot with a sunlight viewable display designed for a variety of vessels. It utilizes a self-learning and adaptive software algorithm, and plays the ultimate role in course-keeping capability. NavPilot dynamically adjusts essential parameters during navigation, such as vessel speed, trim, draught, tide and wind effects, dead band, weather and more. These parameters are stored in system memory and continuously optimized to make the NavPilot more versatile. The new NavPilot 711C features a color day/night graphic display, offering much better sunlight viewability during the day while not affecting your night vision when the sun goes down. Self-learning and adaptive software From the first dock-side setup through the last voyage you made, NavPilot continues to learn your vessel's steering characteristics, allowing for real-time, dynamic adjustments to make the boat's steering more accurate. SAFE HELM and POWER ASSIST features provide Efficient and Effective Helm Steering Control The optional SAFE HELM and POWER ASSIST features provide a unique interface to the vessel's hydraulic hand steering system, providing unrivaled comfort and control of steering directly from any manual helm on the vessel. These two modes greatly reduce steering effort and enhance the safety of your autopilot. The POWER ASSIST mode incorporates the SAFE HELM concept and provides speed-based, power assisted steering, which greatly reduces manual helm effort in maneuvering situations. POWER ASSIST is a unique helm-activated assisted steering feature that can augment or replace separate electric and power-robbing, engine-driven power steering systems on many vessels. POWER ASSIST reduces steering system complexity and costs while increasing economy. SAFE HELM and POWER ASSIST modes will require the optional FPS8 Power Steering Module and an appropriate HRP Pumpset. If you are interested in utilizing the SAFE HELM and POWER ASSIST features, it is highly recommend that, when installing the NavPilot 700 Series Autopilot, the optional FPS8 Power Steering Module is purchased and installed at the same time. This will eliminate the need to re-plumb the hydraulic system and run additional connection cables in the future. FishHunter mode FishHunter mode is a unique feature of FURUNO's NavPilot series. Find a fish target with your FURUNO sonar/sounder or bird target with your FURUNO radar and feed it to the NavPilot The NavPilot will activate the FishHunter mode to perform square, zigzag, circle, orbit, spiral or figure-eight maneuvers around the specified target at a user selected distance. This feature can also be used for Man Overboard (MOB). Furuno's new NavPilot series is designed to match the NavNet 3D, FI-50 Instrument series and other navigation equipment. The Plug and Play CAN bus interface allows for easy installation and exceptional interface ability. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.